Dispensing pumps are essential tools that a wide variety of industries utilise. These fields get used to dispense liquid products accurately and efficiently. Be it as a chemist, a pharmaceutical manufacturer, or someone who wants to dispense liquid soap at home. A dispensing pump can make your work much more convenient and efficient.
In this article, you can explore a step-by-step guide on how to use a dispensing pump effectively.
Step 1: Choose the Right Pump
The first step in using a dispensing pump is to choose the right one for your needs. Many different types of dispensing pumps are available in the market, each designed for specific purposes. Some pumps get designed for dispensing thick liquids like lotions and creams. On the other hand, others are suitable for thin liquids like oils and solvents. Therefore, choosing a pump compatible with the product you intend to dispense is only essential.
Step 2: Prepare the Pump
Once you have chosen the right pump for precision dispensing, the next step is to prepare it for use. Start by removing the pump from its packaging and checking for any damages. Then, attach the pump to the container that holds the liquid product. Ensure that the pump is tightly secured to the container to prevent leaks and for precision dispensing.
Step 3: Prime the Pump
Before you start dispensing the liquid, you need to prime the pump. Priming helps create a vacuum that draws the fluid up into the pump. This process enables it to dispense smoothly. To prime the pump, hold it over a sink or a container. Pump it several times until the liquid starts flowing out of the nozzle.
Step 4: Dispense the Liquid
After priming and preparing the pump, it is time to dispense the liquid. To do this, press down on the pump’s nozzle to release the fluid. The times you will push it can vary depending on the type of pump you are using. Some may require you to drive it several times. Doing so can help discharge the desired amount of liquid. Be sure to dispense the liquid slowly and steadily for precision dispensing. Also, a slow pace can help avoid spills and wastage.
Step 5: Clean the Pump
After using the dispensing pump, thoroughly cleaning it is essential to prevent blockages and contamination. To do this, remove the pump from the container and rinse it with warm water. Afterwards, pump clean water through the pump several times. Doing so can remove any residue or leftover liquid. Finally, leave the pump to dry completely before storing your dispensing pump somewhere safe.
Here are some additional tips to help you use a dispensing pump more effectively:
- Read the manual. Like any other items, dispensing pumps come with a manual. Always read the instructions in the guidebook to ensure you are using your pumps correctly.
- Proper storage. Store the liquid product in a container with a tight-fitting lid to prevent evaporation and contamination.
- Remove, soak, and rinse. If the precision dispensing pump becomes clogged, remove it from the container and soak it in warm water for a few minutes before rinsing it with clean water.
- Using clean pumps. Always use a clean pump when dispensing liquid products to prevent contamination.
- For dangers. If you utilise a dispensing pump in highly flammable or hazardous liquids, ensure following the appropriate safety guidelines.
- Extending its life. To do this to your dispensing pump, avoid using it for products that contain abrasive or corrosive materials.
With Unicontrols, you can enjoy the benefits of using a dispensing pump for many years! Our range of innovative products can give you the best of both worlds. You can rest assured you are only using high-quality pumps for different purposes. Check out their website today!
